King Controls 1200-KU, Installation And Operating Instructions Manual

Page: 9 / 36

Page 7
COAX REQUIREMENTS
1200-KU TYPICAL INSTALLATIONS
Fig. 7
IMPORTANT! USE ONLY THE COAX CABLE SUPPLIED WITH THE SEA-KING.
COIL AND STORE EXCESS CABLE IN THE CABINET WITH THE COMPONENTS.
DO NOT CUT COAX.
If coax cable other than that supplied with the Sea-King is used, the following guidelines
must be followed:
1) Ends must be terminated with SNAP-N-SEAL
®
connectors (Fig. 8).
DO NOT USE TWIST-ON OR HEX-CRIMPED CONNECTORS.
2) Cable must be RG6 and rated at 2.2 GHz or higher.
Fig. 8