King Controls 1200-KU, Installation And Operating Instructions Manual

Page: 31 / 36

Page 29
CHOOSING A NEW ZONE USING THE WALL MOUNT SWITCH
1. Determine the zone you wish to program from the map on page 19.
2. On the wall mount switch, momentarily press ON.
3. The Status light will flash a variety of colors. Watch for it to flash orange, and then red or
green.
Immediately press ON 3 times. (Note: you must have completed pressing ON 3 times
within 5 seconds of Step 2.
Status light will flash orange, and then red 4 times.
4 Click ON the same number of times as the LEFT hand digit of the zone (if 0, do not click).
Hold the right button DOWN until the status light flashes orange, then release.
Status light will flash red 4 times.
5. Click ON the same number of times as the RIGHT hand digit of the zone (if 0, do not
click).
Hold the right button UP until the status light flashes orange, then release.
Status light will flash red 4 times.
The new zone is programmed in, and the system will start up and automatically find the
satellite.
Note: Choose a new zone only if you have traveled a significant distance and are unable to acquire the satellite
IMPORTANT! You must complete step 3 within 5 seconds of step 2.