QUICK START GUIDE
Kinesis
®
Savant Elite2
™
Control Module with
SmartSet Config App, Models FPMJ2 & FPMJ4
DEFAULT CONFIGURATION
Your Savant Elite2 Control Module comes with either two or four factory-programmed actions:
To use your Savant Elite2 Control Module with the factory-programmed actions:
1. Connect your Kinesis foot pedal(s) or hand trigger(s) to the jack(s) of your choice.
2. Plug the Control Module’s USB cable into your computer.
3. The red LED on the Module will illuminate and a device installation notice will appear.
4. When the green LED illuminates, the device is ready to use with the pre-programmed actions.
5. To switch actions, simply move the pedal/hand trigger to a different jack.
22030 20th Avenue SE, Suite 102, Bothell, Washington 98021 USA
[email protected], 800-454-6374, www.kinesis.com
© 2016 by Kinesis Corporation, all rights reserved. Printed in the USA on recycled paper. KINESIS is a registered trademark of Kinesis Corporation. SAVANT ELITE2, V-DRIVE, SE2, and SMARTSET are
trademarks of Kinesis Corporation. WINDOWS, MAC, and ANDROID are registered trademarks of Microsoft Corporation, Apple, Inc., and Google, Inc., respectively.
There is no software or special drivers to install — all you need is a USB port. The Savant Elite2
works with Windows, Mac, Android, and Linux. SmartSet Config App versions are onboard for
graphical programming in Windows & OSX. Visit the SE2 Resources page for full User’s Manual
including how to program in Android and Linux: www.kinesis.com/savant-elite2-resources/.
LANGUAGE NOTE: You must use U.S. English keyboard driver when re-programming your device,
then switch back to your normal language
.
Jack ac ons:
Jack 1: Le mouse bu on
Jack 2: Right mouse bu on
Jack ac ons:
Jack 1: Le mouse bu on
Jack 2: Right mouse bu on
Jack 3: backspace key ac on
Jack 4: sample macro “Thank you,”
