3
Jack 1
CUSTOM CONFIGURATION (WINDOWS)
1. With the SE2 device connected to a PC, activate Program
Mode by SLIDING THE SWITCH on the underside of the
device. For waterproof models, DEPRESS A PEDAL BRIEFLY
WHILE PLUGGING IN THE USB. The red LED will illuminate
briefly.
2. Once the LED changes to flashing green, OPEN the
“KINESIS FP” drive. If you do not see an AutoPlay popup,
look in “My Computer” for “KINESIS FP”.
3. Once inside the KINESIS FP drive, double-click the “SE2
SmartSet App (Win)” application to run it.
4. To program a new custom action, click CONFIGURE for the
desired jack.
5. Choose the type of action to program by clicking either
“Single Action”, “Multiple Actions (Macro)” or the “Special
Actions” drop-down menu.
6. INPUT desired action(s) into the yellow programming box
and click DONE.
7. The newly programmed action will now appear in the
corresponding gray box below. REPEAT steps 4—6 as
necessary to configure additional jacks.
8. If you are satisfied with your new custom action(s) click
SAVE, and then click EXIT PROGRAM.
9. Put the device back into Play Mode by SLIDING THE
SWITCH. For waterproof models, RE-PLUG THE USB.
10. Your Savant Elite2 device is now ready to use with your
custom programmed actions!
