44
Expand
Note:
Factory default: "Timer: 5 min",
"Ready countdown: 5 min".
This function is used to set a frequency for filter
cleaning.
When the projector reached a specified time
between cleanings, a Filter warning icon
appears on the screen, notifying the cleaning
is necessary. After cleaning the filter, be sure
to select RESET and set the timer. The Filter
warning icon will not turn off until the filter
counter is reset.
Filter counte
r............The time that filter used.
Timer
........................ Frequency for filter
cleaning.
Filter counter reset
..Reset the filter counter.
Power management
Filter counter
Display
Color adjust
Setting
Expand
Info.
Move
Select
Back
Memory
Viewer
Power management
Ready
Shut down
Timer 5 Min
Ready countdown 5 Min
Off
Display
Color adjust
Setting
Expand
Info.
Move
Next
Back
Memory
Viewer
Filter counter
Filiter counter 26 H
Timer
200H
Filter counter reset
Power management
No signal
01 : 20
Time left before Lamp is off.
For reducing power consumption as well as maintaining the lamp life, the Power management
function turns off the projection lamp when the projector is not operated for a certain period.Select
one of the following options:
Ready
.................. When the lamp has been fully cooled down, the POWER indicator
changes to green blinking.In this condition, the projection lamp will be turned on
if the input signal is reconnected or any button on the side control or remote
control is pressed.
Shut down
.......... When the lamp has been fully cooled down, the power will be turned off.
Off
....................... Power management function is off.
Timer
................... If the input signal is interrupted and no button is pressed for more than 30
seconds, the timer display with No signal appears. It starts the countdown until
the lamp is turned off. Press
button to set the Timer(1~30min.)
Ready countdown
..Set the time that ready status transfers to standby status automatically.(0-
30min.0 Min: not transfer automatically)
In ready status, press Power button to swicth to standby status, and press
any other button to turn on the projector.
Power management
Filter counter
