background image

15L WET & DRY SHED VAC

3

GENERAL SAFETY WARNINGS

WARNING!

 Read all safety warnings and all instructions. Failure to follow the warnings and  

instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions 

 for future reference. 

1) ELECTRICAL SAFETY

a)

 

Power lead plugs must match the outlet. 

Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. 

Unmodified plugs and matching outlets will reduce risk of electric shock.

b)

 

Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. 

There is an increased risk of electric shock if your body is earthed or grounded. 

c) Do not expose power tools to rain or wet conditions.  

Water entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. 

Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from 

heat, oil, sharp edges or moving parts.Damaged or entangled cords increase the risk of electric shock.

e) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. 

Use 

of an RCD reduces the risk of electric shock.

f) Do not operate powered products in explosive atmospheres, such as in the presence of flammable liquids, gases or 

dust. 

Powered products create sparks which may ignite the dust or fumes.

g) Keep children and bystanders away while operating any powered products. 

Distractions can cause  

you to lose control.

2) SERVICE

a) Have your power tool serviced by a qualified repair person using only identical replacement parts. 

This will ensure 

that the safety of the power tool is maintained.

3) VACUUM SAFETY INSTRUCTIONS

a) This device is not intended for use by persons (including children) with reduced physical,  sensory or mental abilities 

or lacking experience and/or knowledge, 

unless they are supervised by a person responsible for their safety or are 

instructed by these persons on the use of the device.

b) Children should be supervised,

 to ensure that they do not play with the device.

c) Keep packaging film away from children

- risk of suffocation!

d) Switch the appliance off after every use and prior to every cleaning/maintenance procedure.
e) Risk of fire. 

Do not vacuum up any burning or glowing objects.

f) The appliance may not be used in areas where a risk of explosion is present.
g) Only use the appliance for its designated purpose. 

Any other types of use are at your own risk and are  

possibly dangerous.

h)

 Never use the appliance when you are under the influence of medication, alcohol or drugs, if you are currently under 

medical care, or if you are tired.

Summary of Contents for KP701










Reviews: