15L WET & DRY SHED VAC
9
IMPORTANT!
If the vacuum cleaner still fails to operate correctly after you have carried out the above operations,
or in the event of anomalies other than those described above, take the vacuum to an authorised service centre or
place of purchase showing proof of purchase for assistance.
PROBLEM
CAUSES
SOLUTIONS
The vacuum cleaner fails
to start
Power cord is disconnected
Check the electric power
supply line is connected to your wall
socket correctly
Vacuum is not switched ON
Check that the vacuum is turned ON.
To turn ON the vacuum press the ON/
OFF switch
(5)
to the “ON” “I” position.
Electrical fault
Contact an authorised
service centre.
The vacuum cleaner does not
vacuum efficiently
Vacuum tank
(11)
full
Empty the vacuum tank
(11).
Dirty / Clogged / Full filter
Clean the filter as described in
maintenance of your vacuum. (Empty or
replace filter bags if applicable to your
vacuum model)
The vacuum safety float valve
(14)
has
activated due to the vacuum tank
(11)
being full of a liquid.
Empty the vacuum tank
(11).
Check that the vacuum hose
(3)
or the
nozzle are not blocked
Ensure that the vacuum hose
(3)
is not
blocked by removing the vacuum hose
(3)
assembly and inserting a broom
handle through the vacuum hose
(3)
to
clear any obstructions.
Do not force the broom handle to
clear obstruction
s.
Motor head
(12)
not assembled
correctly
Reassemble the motor head
(12)
checking that it fits well onto the
vacuum tank
(11)
and secure it in place
with tank retention clips
(10)
.
Substantial increase in motor
revolutions and decrease in suction
Vacuum hose
(3)
blocked
Ensure that the hose is not blocked
by removing the hose assembly and
inserting a broom handle through the
hose to clear any obstructions.
Do not force the broom handle to
clear obstructions.
The vacuum safety float valve
(14)
blocks the vacuum.
A.
This can happen when the vacuum
tank is full of liquid or
B.
the vacuum has overturned.
To reset the safety float valve
(14)
A.
Turn off the vacuum & empty the
vacuum tank
(11).
B.
Upright the vacuum & turn it off and
wait for 3-5 seconds.
TROUBLE SHOOTING
Warranty given by Kincrome Australia Pty Ltd of 3 Lakeview Drive, Caribbean Park, Scoresby, Victoria (Tel 1300 657 528). The applicable warranty
period (12 months) commences on the date that the product is purchased. If this product has materials or workmanship defects (other than defects
caused by abnormal or non warranted use) you can, at your cost, send the product to place of purchase, an authorised Kincrome service agent or one
of Kincromes addresses for repair or replacement. Your rights under this warranty are in addition to any other rights you have under the Australian
Consumer Law or other applicable laws. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For further details
please visit www.kincrome.com.au or call us. Due to minor changes in design or manufacture, the product you purchase may sometimes differ from
the one shown on the packaging.
SPARE PARTS
For a full list of available spare parts for this item refer to the Kincrome website www.kincrome.com.au.
Type in the part number & click on the documentation tab for a copy of the parts diagram and listing.