10
PRESSURE WASHER 1520PSI
PRESSURE WASHER 1520PSI
Warranty given by Kincrome Australia Pty Ltd of 3 Lakeview Drive, Caribbean Park, Scoresby, Victoria (Tel 1300 657 528). The applicable warranty period (12
months) commences on the date that the product is purchased. If this product has materials or workmanship defects (other than defects caused by abnormal or
non warranted use) you can, at your cost, send the product to place of purchase, an authorised Kincrome service agent or one of Kincromes addresses for repair
or replacement. Your rights under this warranty are in addition to any other rights you have under the Australian Consumer Law or other applicable laws. Our
goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure. For further details please visit www.kincrome.com.au or call us. Due to minor changes in design or
manufacture, the product you purchase may sometimes differ from the one shown on the packaging.
Spare Parts
For a full list of available spare parts for this item visit the Kincrome website kincrome.com.au or alternatively contact Kincrome
Customer Service.
Service
Have your product serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety,
reliability and performance of the Pressure Washer is maintained.
Office Contact Details
Phone: 1300 657 528
Fax: 1300 556 005
Email: [email protected]
Website: www.kincrome.com.au
Caring For The Environment
When a tool is no longer usable it should not be disposed of with household waste, but in an environmentally friendly
way. Please recycle where facilities exist. Check with your local council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled material decreases pollution
in the environment. Please recycle packaging where facilities exist. Check with your local council authority
for recycling advice.
Cleaning & Maintenance
WARNING!
Always ensure that the machine is not connected to the mains supply before you start any maintenance work.
WARNING!
Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals
may weaken the plastic materials used in these parts. Use a cloth dampened only with water and mild soap. Never let
any liquid get inside the tool; never immerse any part of the tool into a liquid.
WARNING!
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Cleaning Nozzles
If a blockage of the nozzle occurs simply remove the nozzle from the Pressure Washer lance & insert the nozzle cleaning pin (17)
through the nozzles output (inserting the pin externally to press any debris out of the nozzle hole). Inserting the nozzle cleaning pin
(17) will mean that any debris dislodged from the nozzle could remain in the lining of the nozzle . Flush the nozzle with clean water to
ensure any debris is removed from inside the nozzle before re-installing the nozzle to your Pressure Washer lance.
Cleaning the Detergent Bottle
Please ensure that you thoroughly rinse the detergent bottle with water after each use.
Replacing Motor Brushes
Carbon brushes are a wearing component of the Pressure Washer therefore not covered under Kincrome warranty, please contact
Kincrome Customer Service for a service agent closest to you.
Warranty
10
