ASSEMBLY (Continued)
6. Assemble the Underseat Storage (6) to the Support Legs (4) with the supplied bolts, spring and flat washers, hand tightening only (Fig 7).
7. Allign a Castor (5) with the threads located on the bottom of the Underseat Storage (6), assemble with the supplied bolt, spring washer and washer, using the supplied 4mm Hex Key, repeat
for all Castors (5) (Fig 8).
8. Assemble the Can Holder (7) on an opposite side of one of the drawers. Remove 4 bolts previously installed (Fig 9) and allign the can holder to the side of the Workshop Creeper Seat.
9. Reinstall the 4 bolts, spring washer and washer removed in the previous step, to secure the Can Holder (7) to the Workshop Creeper Seat (Fig 10).
10. Turn the Kincrome Workshop Creeper Seat over onto it’s wheels to ensure everything is correctly aligned, then tighten all bolts using the supplied 4mm Hex Key (Fig 11).
11. Your Kincrome Workshop Creeper Seat is now ready for use.
12. Periodically check all bolts are tight on your stool.
Maintenance & Storage
The K8114 Kincrome Creeper Seat should be stored in a cool and dry area, out of reach of children.
a) Little maintenance is required for this product. Wipe clean as needed; only use a mild soap to clean and dry immediately.
b) Check to ensure all fasteners are tight periodically.
Spare Parts
Spare parts are avilable for the K8114 Kincrome Workshop Creeper Seat.
Part No.
Description
K8114-1
Fastener Pack
K8114-2
4 X Swivel Castors
K8114-3
Can Holder
Australian Office Contact Details
UK Office Contact Details
Phone: 1300 657 528
Mail: Kincrome UK Ltd PO Box 646 Eastleigh SO50 ONA
Fax:
1300
556
005
Email:
Email:
Website:
www.kincrome.co.uk
Website:
www.kincrome.com.au
Warranty given by Kincrome Tools & Equipment Pty Ltd of 3 Lakeview Drive, Caribbean Park, Scoresby, Victoria, Australia (Tel +61 3 9730 7100) If this product has materials or workmanship defects (other than defects caused by
abnormal or non warranted use) you can, at your cost, send the product to place of purchase, an authorised Kincrome service agent or one of Kincromes addresses for repair or replacement. Your rights under this warranty are in
addition to any other rights you have under the Australian, United Kingdom & Ireland Consumer Law or other applicable laws. Our goods come with guarantees that cannot be excluded under the Australian, United Kingdom & Ireland
Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure. For further details please visit www.kincrome.com.au or call us. Due to minor changes in designor manufacture, the product you purchase may sometimes differ
from the one shown on the packaging.
(Fig 7)
(Fig8)
(Fig 9)
(Fig 10)
(Fig 11)
(Fig 12)
(Fig 4)
(Fig 5)
(Fig 6)