3
10T HYDRAULIC BODY REPAIR KIT
General Safety Warnings
Save all warnings and instructions for future reference.
Read and understand the entire contents of this manual before attempting to use the body repair kit.
IMPORTANT SAFETY INSTRUCTIONS
This body repair kit is designed and intended for use by properly trained and experienced personnel only.
If you are not familiar with the proper and safe use of a body repair kit, do not use until proper training and knowledge has
been obtained.
Failure to comply with all of these warnings may cause serious injury.
The use of a Body Repair Kits has inherent dangers to avoid risk of personal injury or property damage make sure you are fully \
aware of the operating instructions for this product. Do not exceed maximum rated capacity of this Body Repair Kit.
Preparing Work Area
Before using body repair kit, it is important to prepare work area properly. Follow this procedure each time the body repair kit is
used to help prevent property damage and or serious injury.
1.
Do not exceed the maximum load capacity of the ram.
2.
Use only on hard level surfaces capable of sustaining the load.
3.
Do not open oil filler screw unless ram is fully retracted and pressure is released.
4.
Do not use as a vehicle lifting device, or as a vehicle support.
5.
When extension tubes and/or offset attachments are used, the rated capacity is reduced by 50% for each tube or
attachment connected.
6.
Make sure all attachments are fully engaged before applying load or pressure.
7.
If bowing or bending of ram or any attachment occurs during use, STOP, release pressure immediately and reconsider
application. Application may not be compatible with product, a ram kit with a higher rated capacity may be required.
8.
Do not over extend the ram, as it is possible to force the plunger out of the top of the cylinder.
9.
When coupler valves are disconnected, insert dust cap to keep the oil lines clean.
10.
Make sure the load is centrally applied to attachment or ram saddle. Do not load off centre.
11.
Control the load. Always use a slow controlled release of system pressure. Failure to comply may result in serious injury
or death. Avoid rapid releases of pressure.
12.
Do not drop any heavy objects onto the hose and do not allow the hose to kink.
13.
Allow clearance for the hose to avoid damage to the hose and couplers.
14.
Keep equipment away from heat or fire, as this may damage or weaken the equipment.
15.
Keep the floor around the body repair kit clean and free of scrap material, oil, and grease.
16.
Use the right tool. Do not force a tool or attachment to do a job which it was not designed for.
17.
Replace warning labels if they become obscured or removed.
18.
Give your work undivided attention. Looking around, carrying on a conversation, and “horse-play” are careless acts that
can result in serious injury.
19.
Keep visitors a safe distance from the work area.
20.
Use recommended genuine Kincrome accessories. Improper accessories may be hazardous.
21.
Keep children and unauthorized persons away from the work area.
Personal Safety
1.
Stay alert.
Watch what you are doing and use common sense when operating the tool. Do not use the tool while tired or
under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool increases the risk of
injury to persons.
2.
Dress properly. Do not wear loose clothing or jewellery. Contain long hair. Keep hair, clothing and gloves away from
moving parts.
Loose clothes, jewellery, or long hair increases the risk of injury to persons as a result of being caught
in moving parts.
Summary of Contents for K15146 Type 2
Page 10: ...10 10T HYDRAULIC BODY REPAIR KIT NOTES...
Page 11: ...11 10T HYDRAULIC BODY REPAIR KIT...
Page 12: ...www kincrome com au...
