Kinco HP043-20DT, User Manual

Page: 21 / 53

Kinco-HP
User Manual
21
3.2.2 Install driver of USB programming port
HMI-PLC provides USB programming port. This programming port will be used as virtual
serial port in PC. Its driver files are located in \drivers in Kincobuilder installation folder. Right
now it supports Windows XP
、
Windows 7
和
Windows 8 systems, as shown in following
figure:
When connecting programming cable to HMI-PLC and PC first time, Windows system
will detect new hardware and mention installing driver, users can install the driver according to
the version of Windows.

Fail in installing driver in Windows 7?
If it is simplified Win7 system, it will be lack of files mdmcpq.inf and usbser.sys, so it can
not install the virtual serial port.
These two files are in the path ..\Win7\windows, users can copy these two files to
following path and install the driver again.
 Copy mdmcpq.inf to C:\WINDOWS\INF.
 Copy usbser.sys to C:\WINDOWS\SYSTEM32\DRIVERS\

How to install driver in Windows 8,Windows10 ?
1
、
If you can use internet,Win8/Win10 will update driver automatically .