Assembly Instructions
Perks
™
Page 1 of 2
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Service.
Part No. 2040777
Revision A-08
Wall Mount
Markerboard or Tackboard
Tools Required
■
Tape Measure
■
Phillips Screwdriver
■
Level
■
Drill
Package Contents
■
1 Markerboard
■
5 #10 x 1" Truss Head
or Tackboard
Phillips Sheet Metal Screws
■
1 Pencil Tray
(Markerboard only)
(Markerboard only)
■
4 1
1
⁄
2
" Screws for
■
1 Wall Mount Bracket
Marker Tray
Installation
1. Lay board face down on a smooth, solid surface and remove
shipping screw that is holding wall mount (shorter) portion
of bracket to board. (Figure A).
Note:
Fasteners needed to attach wall mount bracket to wall
are
NOT
included.
See chart at right for recommended fasteners.
Figure A
Remove
shipping
screw
Wood Studs
Metal Studs
Concrete or Block Wall
For 2" x 4" wood studs
For 20 gauge metal studs
1.
1
⁄
4
" toggle bolts;
or greater:
or heavier:
2.
1
⁄
4
" - 20 expansion
#10 x 2" screws
1. #7 x 1
1
⁄
4
" Phillips
anchors;
Flathead self-starting
3. STAR
1
⁄
4
" short lag
screw for
3
⁄
8
" drywall;
screw expansion
2. #7 x 1
1
⁄
2
" Phillips
shields;
Flathead self-starting
4. Vinyl screw anchors
screws for
1
⁄
2
" or
for
1
⁄
4
" lag bolts and
5
⁄
8
" drywall
#12 x 1
1
⁄
2
" screws
face side down
