10
SW5:
Auto-Learning Mode: The Counter counts screws number with the judging value OK & NG which is set
up by Ht and Lt, this Auto-Learning Mode is completely using Electric Screwdriver to fasten screws
practically, memorize the screwing time from beginning to complete fastening automatically, user can
only change this switch to ON, then system will ask how many screws (SC) of the fastening position
been required? If need auto response time setting (At) or if need to use the Slow-Start setting (Rc)?
SW6
：
Arrangement form: The memory can save five units number, user can push switch ON, the system will
automatically arrange five units, easy for user to make arrangement at work.
SW7
：
Reverse Resuming
：
User can turn on the reverse resuming switch to loose screws back. The system is
able to count backward for presetting quantity of screws to be fastened. If the reverse resuming
switch is switched to off, the system is only to do countdown for the last screw.
※
If using three units of data only and let three units in cycles. It can set up
“
00
”
in counting number on U4, when
SW6 switch ON, the system will automatically move in circle from U1~U3.
