KTM-4B-25
DI-4B-25
TORQUE
CHECKER
14
6. About charge
If this measuring instrument is left 5 minutes or more or battery capacity stops being sufficient,
-L- will be displayed and a power supply will be turned off automatically. Charge should
charge by inserting the connector of the charger of exclusive use in AC ADAPTOR terminal.
The fully charge is in the state which turned OFF the power supply switch, and takes about 8 hours.
Do not perform charge of 8 hours or more. (It may become the cause of the fire by a burst
of a battery, generation of heat, and liquid leak, or an injury by fault charge.)
7. About system reset
After a Ni-Cd battery discharges completely(when not using it for a long period of time),
even if it charges and it turn on a power supply, CPU in equipment may not start.
If you become such a situation, please push a system reset button at once.
It will be in an initial state. (it is the same as that of the time of purchase)
A system reset button is in the inside of a main part.
8. Guarantee
It is allowed to fix gratuitously, if the fault which will originate in manufacture, transportation, etc.
of our company within one year after a purchase should occur, although product was
manufactured under sufficient quality control.
In the following case, it becomes the charge also within a guarantee term.
Failure by the error, and unjust repair and unjust reconstruction and damage on use
Failure by fall etc. and damage after a purchase
Failure by the natural disaster, pollution, and unusual voltage and damage
9. Calibration trust service
Periodical calibration is required in order to manage the accuracy of torque meter.
By our company, the with the high reliability traced to the national standard is performed, and in
order to use it within accuracy, I recommend you of one year. I offer a result of calibration
document, a certification on calibration, and a traceability system figure by demand.
(Periodical calibration is a charge.)
Documents appended at the time of product purchase
Result of calibration document
Certification on calibration document
Traceability system figure
