Kikusui tos6200, Operation Manual

Page: 3 / 157

TOS 6200/6210 S afety S ymbols I
S afety S ymbols
For the safe use and safe maintenance of this product, the following
symbols are used throughout this manual and on the product.
U nder-
stand the meanings of the symbols and observe the instructions they
indicate (the choice of symbols used depends on the products).
or
I ndicates that a high voltage (over 1000 V) is used here. T ouching
the part causes a possibly fatal electric shock. I f physical contact
is required by your work, start work only after you make sure that
no voltage is output here.
D AN G ER
I ndicates an imminently hazardous situation which, if ignored,
will result in death or serious injury.
I ndicates a potentially hazardous situation which, if ignored,
could result in death or serious injury.
I ndicates a potentially hazardous situation which, if ignored, may
result in damage to the product and other property.
S hows that the act indicated is prohibited.
I s placed before the sign “D AN G ER ,” “W ARNIN G,” or “C AUTION ”
to emphasize these. When this symbol is marked on the product,
see the relevant sections in this manual.
P rotective conductor terminal.
Chassis (frame) terminal.
O n (supply)
O ff (supply)
I n position of a bi-stable push control
O ut position of a bi-stable push control
W ARNIN G
C AUTION