KIKUSUI Electronics Corp.
102
OUTP:IMP
Enables or disables the output impedance.
Use OUTP:IMP:REAL or OUTP:IMP:REAC to set the output impedance.
Command
OUTPut:IMPedance[:STATe] <boolean>
OUTPut:IMPedance[:STATe]?
Parameter
Value:
ON(1)
Enables the output impedance
OFF(0) Disables the output impedance (default)
Settings are reset to default values when an *RST command is sent.
Example
OUTP:IMP ON
Response: NR1