Kikusui DSI1020, Installation Manual, Page: 6 / 64

6
DSI1020/ DSI3020
Note the following points when moving the
product to the installation location or when
transporting the product.
• Turn off the POWER switch.
Moving the product with the POWER switch turned on may
cause electric shock or damage to the product.
• Remove all wiring.
Moving the product with the cables connected may cause
wires to break or injuries due to the product falling over.
• Remove the base hold angles.
Remove the base hold angles or return them to the factory
default condition.
• Unlock the casters.
Use the caster lock levers to unlock the casters. Moving the
product without releasing the lock may cause injuries due to the
product falling over. Move the product over a surface that is as
flat as possible.
• Do not move the product by yourself.
Be sure to have two or more people move the product.
Exercise special care when carrying the product over a
slope or across steps.
Check the weight that is indicated on the heavy object warning
label that you affixed at the time of installation.
If you are using a forklift, be sure to slide the forks under the
bottom of the product, check that the product is stable, and
then raise the product.
If you are using a band or similar item to raise the product
with a crane, be sure to slide the band under the bottom of
the product, check that the product is stable, and then raise
the product. (There are four eye bolt holes on the top panel
of this product. M10 eye bolts can be used for the DSI1020,
and M12 eye bolts can be used for the DSI3020.)
When you move the product, do not tip the product on its
side or turn it upside down.
• When transporting the product, be sure to use the orig-
inal packing materials.
Otherwise, damage may result from vibrations or from the
product falling during transportation.
• Be sure to include this manual.
Precautions for moving the product
Factory default
condition
4-M5