manualshive.com logo in svg

Kikusui DSI1020, Installation Manual, Page: 59 / 64

Share
Download
Kikusui DSI1020 Installation Manual Download Page 59

DSI1020/ DSI3020

59

AppendixB

Troubleshooting

If you notice any symptoms that seem to indicate a malfunction while using the product,
check the table below, and try the relevant remedy.
If you see no relevant items, contact your Kikusui agent or distributor.

Symptom

Inspection

Remedy

Tried to start a test from the SD009-PCR-
LE application software, but the software 
stopped with an error.

• Did you install the control board supplied 

with this product into the PCR-LE/PCR-
LE2 series power supply that you are 
using?

• Did you use the control cable supplied 

with the product to connect the AC 
power supply to this product?

Install the control board supplied with this 
product into the PCR-LE/PCR-LE2 AC 
power supply, and connect between the 
control board connector and the PHASE 
IN connector on the rear panel of this 
product using the control cable supplied 
with the product.

For details, see 

“Connecting the sync sig-

nal interface,” on page 18

.

Summary of Contents for DSI1020

































































Reviews:

No comments