Kikusui DSI1020, Installation Manual, Page: 39 / 64

DSI1020/ DSI3020
39
Installing the Test System
Connecting the cables
1
Check that the product and AC power supplies are turned off ( ).
2
Check that the PC for controlling the test system is turned off.
3
Using the proper cables for your communication interface, connect this
product and the AC power supplies to the PC.
 Other ways of connecting
In addition to connecting the product and the AC power supplies to the PC, the communi-
cation interfaces can be connected in the following ways.
 Cables
Use cables that are appropriate for the communication interface that you are using.
• Communication interface cables are not included with this product.
• For the PC system requirements, see the SD009-PCR-LE application software setup
guide.
Using a USB hub Daisy chaining via GPIB interface
AC power supplies/DSI PC Required cable
RS-232C RS-232C RS-232C crossover cable
RS-232C USB RS-232C crossover cable
* An RS-232C-to-USB adapter is required.
USB USB USB cable
GPIB GPIB GPIB (IEEE488 compliant) cable
GPIB USB GPIB (IEEE488 compliant) cable
* A GPIB-to-USB adapter is required.
USB hub USB
USB
Communication
interface
Communication
interface
AC power supply
DSI DSI
1
GPIB
GPIB
Communication
interface
Communication
interface
AC power
supply
DSI
n n
DSI
1