Kikusui DME1500, Operation Manual, Page: 64 / 76

E-28 PART NAME AND FUNCTIONS DME1500
[ ] key
This key is used to select diode test mesurement mode.
[•)))] key
This key is used to select continuity beeper mesurement mode.
[ ] key
This key is used to select capacitance mesurement mode.
[AC+Hz] key
This key is used to select AC+Hz mesurement mode.
On AC+Hz measured mode, when an input is less sensitivity,
the secondary display show “— — — —”. When the fre-
quency of an input exceeds 51kHz, the primary display will
show “— — — —”.
[AC+DC] key
[AC+DC] key is used to select AC+DC mesurement mode.
[dBm] key
This key is used to converts a voltage measurement into dBm.
[MAX/MIN] key
This key is used to select MAX/MIN mesurement mode.
[REL] key
This key is used to select REL mesurement mode.
[HOLD] key
This key is used to select HOLD mesurement mode.
[ ▲ ], [ ▼ ] key
These keys are used to select mesurement ranges.
[CAL] key
This key is used to calibrate by service engineers. This key is
not involved in the user process.
[AUTO/MAN] key
This key is used to switche range between AUTO and MAN-
UAL.
[3] Primary display
Displays measurement value.