Kikusui DME1500, Operation Manual, Page: 54 / 76

E-18 MEASUREMENT TUTORIAL DME1500
2.1.4 Connections to common Input terminal
• Exceeding the voltge (common mode voltage)
between common input terminal and earth ground
is 500Vdc or ac peak, electrical shock and/or
instrument damage may result. Do not use the
instrument exceeding the common mode voltage is
500Vdc or ac peak.
2.2 Basic Operation
2.2.1 Voltage measurements
(DCV, ACV, DCmV, ACmV)
1.
Press the function key to select desired function.
2. Press [ ] or [ ] to the desired range (if you have no idea
about the value of input, we suggest you always start at the
highest range). Press [AUTO/MAN] key for manual or auto-
ranging selection.
3.
Connect the test lead to the V and COM input terminals of
the instrument.
4. Connect the test lead to the measuring points and read the
displayed value.
• After measuring high voltage to 1000V dc, errors may
occur when the 100µV is measured. Allow up to one
minute prior to making low-level measurements.
WARNING
NOTE