Kikusui DME1500, Operation Manual, Page: 51 / 76

DME1500
SETUP E-15
1.5 AC power cord connection
•
A power cord with a three-prong plug as shown in
Fig.1-2 is the rated voltage of 125 V. It is provided with
the product which is 100 V system line voltage.When
you use the DME1500 which you have changed the line
voltage range to 200 V system, replace with an appro-
priate power code.
Fig.1-2 AC power cord with a three-prong plug
included with the DME1500
Make connections as follows:
1.
Turn off the [POWER] switch.
2.
Connect the power code to the AC LINE connector on the
rear panel.
3. Plug the power code into the receptacle.
WARNING
Do not use this type of power
cord for over 125 VAC.