Kikusui DME1500, Operation Manual, Page: 49 / 76

DME1500
SETUP E-13
1.3 Precautions for moving
When moving or transporting the product to an installation site,
observe the following precautions.
■ Turn the POWER switch off.
Moving the product with the power on may result in electrical
shock or damage.
■ Remove all wirings connected.
Moving the product with cables connected may break the cables
or cause the product to fall, resulting in injury.
■
For transportation, use the special packing material for
the product.
Transport the product in its original package to prevent vibration
and falls, which may damage the product. If you require packing
material, contact Kikusui distributor/agent.
1.4 Checking the Line Voltage and Fuse
This instrument is used by selecting one of the three line voltage
ranges specified in table 1-1. Check the default settings to deter-
mine whether the voltage is suitable for your instrument. Use a
input power fuse appropriate for your line voltage range.
• To prevent electric shock, be sure to unplug the AC
power cord before checking or replacing the fuse.
• Make sure that the fuse used conforms to the
instrument speci fi cations, including shape, rating,
and characteristics. Using a fuse with different rat-
ing or short-circuiting, the fuse holder will damage
the instrument.
When checking or changing the line voltage range, or when
checking or replacing the power fuse, observe the following
instructions:
WARNING
CAUTION