Kiefer Klimatechnik GmbH
www.kieferklima.de
INDUSAIL SONIC active acoustic sail system
Technical modifications reserved
- E1909_08/21
PART II-19
EC/EU declaration of conformity
according to the Machinery Directive 2006/42/EC of 17 May 2006, Annex II, Part 1, Section A and the EU
Directive 2014/30/EU (electromagnetic compatibility) of 26 February 2014.
We hereby declare that the machine designated below meets the relevant provisions of the EC Machinery
Directive 2006/42/EC and the EMC Directive.
Manufacturer:
Kiefer Klimatechnik GmbH
Heilbronner Straße 380 - 388
70469 Stuttgart
Machine:
Ventilation unit, large area luminaire
Type:
INDUSAIL SYSTEM SONIC plus
INDUSAIL SYSTEM LUMINOUS plus, air, silent
Relevant EC directives and regulations:
Directive 2006/42/EC, OJ L 157/24 of 17.05.2006 (Machinery Directive)
Directive 2014/30/EU, OJ L 96/79 of 26.2.2014 (EMC Directive)
Applicable harmonised standards, in particular:
DIN EN ISO 12100:2011-03; DIN EN ISO 13857:2020-04; DIN EN 61000-6-2:2016-05;
DIN EN 61000-6-3:2011-09; DIN EN 60335-1:2020-08; DIN EN 349:2008-09;
EN IEC 55015:2019/A11:2020; EN 61000-3-3:2013; EN 61000-3-2:2014; EN 61547:2009
Other national standards, guidelines and technical specifications:
DIN EN 82079-1
VDI 6022 Part 1: 2018-01
RLT-Guideline 03; August 2016
Manufacturer's signature
Clemens Kiefer
i. V. Daniel Nack
Managing Director
Head of Research and
Development Department
___________________________ ___________________________
_________________________
Place, date
Signature
Signature
Stuttgart, 26.04.2021
TRANSPORT INSTRUCTIONS, DELIVERY
AND STORAGE
Transport instructions and delivery
The secondary air cooling unit and lighting sail are supplied separately in sturdy transport packaging, i.e. shrink-wrapped
on one-way pallets and secured with plastic or metal bands. The installation and/or control accessories are supplied in a
separate cardboard box.
Storage / inbound delivery
The recipient at the delivery location must check the units and sails for damage immediately on arrival. Any damage found
must be recorded on the delivery note. The haulier and the relevant contractual partner must be notified immediately if any
damage is discovered or any parts on the delivery note are missing. Subsequent complaints cannot be considered.
Packaged products must be transported and stored as follows:
P
Fully protected from weather conditions and humidity/moisture, i.e. do not keep or store products outdoors
P
Transport and store products in dry, dust-free ambient conditions
P
Do not expose products to corrosive or aggressive media
P
Protect products from direct sunlight
P
Storage temperature: 5 °C to 50 °C
In order to prevent contamination of and damage to the unit, the packaging and protective film (if present) must not be
removed until immediately before commissioning.
P
Note:
Moisture and temperature effects can cause the
dimensions of the material to change. We recommend
storing the cardboard boxes for 2 to 3 days in the
room where they will be used, before proceeding
further.
Disposal, environmental protection and recycling
All products are packaged carefully in environmentally friendly materials. The packaging material must be disposed of in
accordance with local regulations.
Declaration of conformity
The cardboard packaging and protective films serve to
protect the unit from dirt and damage and must not be
removed during the construction phase!
The manufacturer accepts no liability for soiling of or
damage to the unit.
