KIDDY phoenixfix pro 2, Directions For Use Manual

Page: 24 / 109

3. General safety instructions
Please read the entire user manual thoroughly before installing the
child restraint system for the first time. Improper installation and use
can endanger the life of your child.
Most injuries, caused by mere thoughtlessness, are easily
avoided.
The child restraint system (A) must always be used with the impact
shield (O) belonging to it.
Use the seat cushions (F) belonging to it for children with a body
weight of approximately 9 - 13kg. Otherwise the seating position
(protection) would deteriorate in the event of an accident or collision.
Check to make sure the child restraint system (A) is properly adjusted
to the size of your child prior to each trip. Do not attempt to make
adjustments during travel.
Make sure that all parts are always properly locked in place.
Make sure that none of the child restraint system’s (A) parts are
caught in doors or reclining seats.
In vans and minivans it is particularly important to ensure that the
child restraint system (A) is installed in an easily accessible seat in
the event that third-party rescue is required.
Use the child restraint system (A) only for weight class I up to a
maximum of 18kg.
The seatbelt should never fit the impact shield (O) loosely. During an
accident strain on the body from a loose seatbelt is significantly
higher than from a tight seatbelt. Make sure the seat belt buckle is
properly fastened.
Never leave your child unattended in the child restraint system (A).
Do not place any heavy items on the rear window shelf; these can
become dangerous projectiles in an accident.
4
ENG