ANGELINA
COT BED
Page 1: ...ANGELINA COT BED ...
Page 2: ... F x 1 COT ASSEMBLY 4 x E each end 4 x D each end 2 x B D D D D E E E The dowel nuts parts E fit into the holes in the sides and base The slot on one end of the nut indicates the direction of the threaded hole and should be visible when the nut is inserted It is advisable to push each nut into its hole and check for correct alignment before inserting any screws A A Do not fully tighten screws at t...
Page 3: ...d Choose 1 of 3 positions 4 x E C E E E E When assembly has been completed fully tighten all screws WARNING Do not place this child s bed near heat sources windows and other furniture WARNING Do not use this child s bed if any of the parts are broken torn or missing ...
Page 4: ... curtain pulls or other strings or cords It should be placed either tight to any wall or have a gap of 300mm between the wall and the side of the bed All assembly fittings should be tightened properly and should be checked regularly and re tightened as necessary To clean use a damp cloth avoiding the use of strong detergents or abrasives An occasional light application of a wax polish will help ma...
