KIDDY phoenixfix pro 2, Directions For Use Manual

Page: 25 / 109

5
Making any modifications to the child restraint system (A) is not
permitted. Doing so nullifies or impairs its effectiveness in protection.
If difficulties arise, please consult your dealer or the manufacturer.
Keep the child restraint system (A) out of direct sunlight to prevent
uncomfortable heating of the surface.
Permit your child to take breaks during longer trips, and be sure that
he or she does not step out of the vehicle into traffic unattended.
Always use the child safety locks in your vehicle’s passenger doors,
if available.
Do not use the child restraint system (A) any further if parts have
been damaged or loosened after an accident (with an impact speed
greater than 10 km/h) or through other causes.
The child restraint system (A) may only be used in seats with
three-point restraints compliant with ECE 16 or comparable
specifications.
Use only the seatbelt configuration prescribed by the manufacturer.
Even when transporting the child restraint system (A) in your car
unoccupied, always secure it in the prescribed fashion with your
vehicle’s three-point restraint (Section 7) or with the k-fix connectors
(D) to the ISOFIX anchor points of the vehicle (Section 6). In this case
the impact shield has to be stored in the footwell or in the boot.
4. Adjustments
4.1 Adjusting the seat cushion height
The kiddy phoenixfix pro 2 is fitted with a seat cushion (F) that provides for
size adjustment between approximately 9- and 18-month-old children
(9-18kg) by changing the seat height.
The seat cushion (F) can be adjusted to several positions to the size of your
child.
ENG