KIDDY evostar1, Directions For Use Manual

Page: 23 / 179

EN
23
WARNING
Do not use any car seat unless specifically re-
commended by KIDDY.
For car seats used in conjunction with a chassis, this vehicle does not replace a
cot or a bed. Should your child need to sleep, then it should be placed in a suita-
ble pram body, cot or bed.
6. Using the Evostar 1 in tandem mode
6.1. Fitting the tandem adaptors.
Insert the tandem adaptors (fig. 33) onto the left and right sides of the main
chassis housings until it locks into place with a click (fig. 34). Ensure the locating
hook is aligned with the locating pin on the rear lower leg.
WARNING
Ensure the adaptors are engaged before use by
pulling them upwards.
6.2. Removing the tandem adaptors.
Depress the grey buttons (fig. 35; no. 1), un-hook the lower section from the rear
leg and remove from the chassis (fig. 35; no. 2).
23
KIDDY MaxiCosi Cybex Be safe Recaro
Evoluna i-Size Pepple plus Aton Q Izi go Privia
Evolunafix Cabrio fix Cloud Q
Evolution Pro 2