KIDDY evostar1, Directions For Use Manual

Page: 19 / 179

EN
19
back and seat cover, adjust to the correct height position and re-thread back
through the seat fabric and seat back rest. Ensure the buckles are fitted correctly
before use.
Adjust the straps to suit the child using the sliders on the harness (fig. 22).
To release the connectors depress the grey button on the buckle housing, the
two connectors will release from the main housing.
WARNING
To avoid serious injury always use a 5 point safe-
ty harness.
Important:
Always ensure the parking brake is engaged when placing and re-
moving children from the vehicle.
3.8. Removing the seat unit from the chassis.
Depress the grey buttons on the side of the seat unit (fig. 23; no. 1) and lift the
seat upwards from the chassis (fig. 23; no. 2).
Important:
Always remove your
child from the seat unit before removing the seat unit from the chassis.
4. Carrycot
4.1. Assembling the carrycot.
Remove the apron and mattress to gain access to the stay bars in the bottom of
the carrycot. Using the tabs, pull the stay bars into the clips on the baseboard
until you hear them click into place (fig. 24). Reposition the lining and place the
mattress back into the carrycot.
Important:
Ensure that the stay bars are fully engaged before using the carrycot.
19