KIDDY Evolution Pro, Directions For Use Manual

Page: 32 / 117

Now place the infant carrier on the adapters with the head-end in the
direction of travel (Fig. 23; No. 1). Check that everything is locked into place.
Now you can decide whether you want to adjust the child's seat in a seated
or reclined position. Press both release buttons on the carry handle and turn
it toward the head side to adjust the reclined position (Fig. 2 No. 2). If you
want to adjust the seated position, turn the carry handle to carrying position
(Fig. 2; No. 1).
To release the Kiddy evolution pro from the stroller, press both release
buttons down (Fig. 23, A) and, at the same time, lift the infant carrier from the
stroller (Fig. 23; B).
9. Use as a rocker
Your Kiddy evolution pro can be used as a rocker in the seated or the
reclined position. To do so, adjust the carry handle in the appropriate
position (see Point 5.1).
Safety instructions:
WARNING
Never leave the child unattended.
WARNING Do not use this infant carrier once your child can sit
unaided.
WARNING This infant carrier is not intended for longer periods of
sleeping.
WARNING It is dangerous to use this reclined infant carrier on an
elevated surface, e.g. a table.
WARNING Always use the restraint system.
Do not use the infant carrier if any components are broken or missing.
Do not use accessories or replacement parts other than those approved by
the manufacturer.
This child seat does not replace a cot or a bed. Should your child need to
sleep, then it should be placed in a suitable cot or bed.
11
ENG