KIDDY Evolution Pro, Directions For Use Manual

Page: 31 / 117

Place the carriage in the foremost position. Slide the side releasing slide at
the knee of the platform to the back (Fig. 17; No. 1) and pull the carriage
forward at the same time (Fig. 17; No. 2).
Now place your Kiddy evolution pro from above onto the Isofix platform, so
that the locking bars are in the grooves of the platform (Fig. 18). If
necessary, press the infant carrier down.
The green display’s at the front and side of the slide indicates whether the
seat is locked securely (Fig. 19). If the green display’s are not visible this
means that your Kiddy evolution pro has not been properly fastened to the
platform!
The final step involves pushing the releasing slide (at the side of the knee)
back (Fig. 20; No. 1) and securely sliding the carriage at the padding of the
vehicle seat's backrest (Fig. 20; No. 2). Now let the releasing slide go. The
next locking position can be found by moving the carriage.
The carriage must be securely locked and if this is the case, the green
display will become visible (Fig. 20; No. 3).
7.2.3 Removal from the Isofix platform
To remove your Kiddy evolution pro from the Isofix platform, keep the release
handle for the infant carrier, which can be found above the front cover,
pulled (Fig. 21; A) and lift the infant carrier from the Isofix platform
(Fig. 21; B).
Your Isofix platform is also equipped with a mechanism to release the infant
carrier. If you pull the releasing handle at the front of the carriage (Fig. 22;
No. 1), you can remove the seat in an upward movement (Fig. 22; No. 2).
8. Use on a stroller
Ensure that the respective adapters (Kiddy art. no. 46-200-MC-000) are
properly mounted to the stroller.
10
ENG