KIDDY Evolution Pro, Directions For Use Manual

Page: 26 / 117

5
Always secure the baby with the belt system (even when you are not
using your Kiddy inside the vehicle)!
Do not place any heavy items on the rear window shelf; these can
become dangerous projectiles in the event of an accident.
Always fasten your Kiddy seat with the vehicle seatbelt or on the
Isofix platform when transporting it in your car unoccupied.
Never use your Kiddy seat without its original cover, it forms part of
the safety concept!
Shield your Kiddy seat from direct sunlight to prevent uncomfortable
heating of the surface.
Schedule breaks during longer trips and take your baby out of the
Kiddy seat to relieve the pressure on its spinal column.
Only fasten the Kiddy seat with the vehicle’s own three-point belt
through the marked belt guides or on the Isofix platform available as
an accessory.
Do not use your Kiddy any more if parts have been damaged or after
an accident (at an impact speed greater than 10 km/h)! (See point 15)
5. General use / adjustments
5.1 Functions of the carry handle / Adjusting the reclined position
To adjust the carry handle, press both carry handle buttons (Fig. 1; No. 1)
and then swivel the carry handle (Fig. 1, No. 2) into the required position.
Make sure that both carry handle buttons are locked in place again
(they protrude)!
The carry handle of your Kiddy evolution pro can be used in two positions
(Fig. 2).
Fig. 2; No. 1
carry position / installation position in vehicle with
3-point seatbelt or on Isofix platform
Fig. 2: No. 2 reclined position for use on stroller or as rocker.
ENG