women, senior citizens and people with heart or respiratory problems are espe-
cially vulnerable. If symptoms of carbon monoxide poisoning are experienced
seek medical attention immediately. CO poisoning can be determined by a car-
boxyhemoglobin test.
The following symptoms are related to CARBON MONOXIDE POISONING and
should be discussed with ALL members of the household:
1. Mild Exposure:
Slight headache, nausea, vomiting, fatigue (often described
as “Flu-like” symptoms).
2. Medium Exposure:
Severe throbbing headache, drowsiness, confusion,
fast heart rate.
3. Extreme Exposure:
Unconsciousness, convulsions, cardio respiratory
failure and death.
The above levels of exposure relate to healthy adults. Levels differ for those
at high risk. Exposure to high levels of carbon monoxide can be fatal or cause
permanent damage and disabilities. Many cases of reported carbon monoxide
poisoning indicate that while victims are aware they are not feeling well, they
become so disoriented they are unable to save themselves by either exiting the
building, or calling for assistance. Also, young children and household pets may
be the first effected. Familiarization with the effects of each level is important.
11. CLEANING YOUR ALARM
YOUR ALARM SHOULD BE CLEANED AT LEAST ONCE A YEAR
You can clean the interior of your alarm (sensing chamber) by using compressed
air or a vacuum cleaner hose and blowing or vacuuming through the openings
around the perimeter of the alarm. The outside of the alarm can be wiped with
a damp cloth. Use only water to dampen the cloth, use of detergents or clean-
ers could damage the alarm.
After cleaning, test your alarm by using the test button. If cleaning does
not restore the alarm to normal operation, the alarm should be replaced.
• Never use detergent or other solvents to clean the unit.
• Avoid spraying air freshener, hair spray, or other aerosols near the alarm.
• Do not paint the unit. Paint will seal the vents and interfere with the
sensor’s ability to detect smoke and CO.
• Never attempt to disassemble the unit or clean inside. This action will
void your warranty.
• The following substances can affect the CO sensor and may cause false read-
ings and damage to the sensor: Methane, propane, isobutane, iso-propanol,
Summary of Contents for P3010CU
Page 22: ......
