background image

1

Standard Features:

Two 4-Button Remote Transmitters

Status indicator (LED)

Valet / override switch

Multi-tone siren (120dB)

Dual stage impact detector

Remote panic

Remote chirp mute 

Remote sensor bypass

Active or passive arming

Optional Features:

Starter disable 

Flashing parking lights

Keyless entry

Remote trunk or hatch release

Illuminated entry

Hood and trunk protection

Remote auto start

Power window roll up

Back-up battery w/charging circuit

Glass break sensor

Note:

Some features may require additional

parts and labor, and may not be appropriate for

certain vehicles. Consult your authorized dealer.

System Operation

ARMING OPERATION

To arm the system press transmitter button 1:

• The siren will chirp once.

• The parking lights will flash once.*

• The doors will lock.*

• The LED will turn solid for 10 seconds

then start flashing slowly. After 10

seconds the system is armed.

After Arming, if the system detects a bad

sensor or an open zone, the siren will chirp

and the parking lights will flash 4 times to

indicate a zone is open. The system will

ignore that input, but keep all other areas

protected.
While Armed, the system will trigger if:

• The doors are opened.
• The shock sensor detects an impact to

the vehicle.

• The hood or trunk is opened.

When triggered, the siren will sound, the

horn will honk*, and the parking lights will

flash* for 30 seconds.
If the same input triggers the system 3 times

during a single arming cycle, the system will

bypass that input, keeping the other zones

protected, until the next time the system is

armed.
If the shock sensor detects a light impact to

the vehicle, the siren will chirp and the

parking lights will flash 5 times to warn away

the potential intruder.
*

Optional Feature

2R / 4-BUTTON SERIES

VEHICLE SECURITY SYSTEM

Button

2

Button

3

Button

1

Button

4

Summary of Contents for BW2900R2

















Reviews: