Kidde Fire Protection SIRIUS, Manual

Page: 21 / 39

TM0066 Page 21 of 39 Issue 2.01
CHAPTER 3
PERFORMANCE SPECIFICATION
3.1 ALARM CONDITION
- The dual fire LED's and the zone of origin LED will operate in a pulsed mode.
- The internal buzzer will operate in a continuous mode.
- The sounder will operate in a pulsed or continuous mode as selected by the switch on
the main pcb.
- Operation of the silence alarms will operate the zone of origin LED and the dual fire
LED's in a constant mode.
- The internal buzzer will operate in a pulsed mode and the sounders will deactivate.
- Activation of another zone will cause it's zonal LED and the dual fire LED's to
operate in a pulsed mode with the original alarm zone LED remaining in a constant
mode.
- The internal buzzer will operate in a constant mode and the sounder circuits will
operate in a pulsed or continuous mode as selected.
- Operation of the silence alarms button will de-activate the sounder circuits and revert
the internal buzzer to a pulsed mode. The status of the LED's will remain unchanged -
the original alarm LED will remain constant the dual fire LED's will revert to constant
and the subsequent zonal alarm LED's will remain in a pulsing mode.
- Operation of the reset button will perform a lamp test on the control panel and revert
the panel's display back to normal operation.
3.2 FAULT CONDITION
- A zonal fault will operate the zone of origin fault LED and the system fault LED in a
pulsed mode.
- The internal buzzer will operate in a pulsed mode.
- Operation of the silence alarms button will operate the internal buzzer in an
intermittent mode but the status of the LED's will remain in a pulsed mode.
- All fault conditions will latch and can only be cleared by operation of the reset button.