background image

Battery Warning

About Thermal Fuses

• Your KID MOTORZ 12 volt battery is equipped with 

a built-in thermal fuse. The thermal fuse is a 

self-resetting safety device which automatically trips 

and shuts down operation of the vehicle if the 

vehicle is overloaded or the driving conditions too 

severe. Once a fuse has tripped it will automatically 

reset itself after approximately 10 seconds and 

allow the vehicle to resume normal operations. To 

avoid repeated automatic shut downs, do not 

overload the vehicle by exceeding the 66 lbs. (30 kg) 

maximum weight capacity or by towing anything 

behind the vehicle. Avoid severe driving conditions, 

such as driving up very steep slopes or running into 

fixed objects, which can cause the wheels to stop 

spinning while power is still being supplied to the 

motors.

• If a thermal fuse in a battery continually trips under 

normal driving conditions, please contact our 

Service Center at 1-909-643-9359.

(The warranty and customer service contact only 

apply in the United States and Canada.)

Important Notes

• This product needed to be provided with two DC 

1.5V AAA batteries (not included in this product).

• Your new battery must be charged for at least 18 

hours before you use it in your vehicle for the first 

time.

• You do not need to remove the battery from your 

vehicle to recharge it.

• The battery must be upright while charging.

• The charger is not a toy.

• Do not short circuit the battery.

• We recommend that you start charging your battery 

before beginning assembly of your new vehicle.

• Before charging the battery, examine the battery 

case for cracks and other damage which may cause 

sulfuric acid (electrolyte) to leak during the charging 

process.

• If damage is detected, do not charge the battery or 

use it in your vehicle. Battery acid is very corrosive 

and can cause severe damage to surfaces it 

contacts.

• Do not charge the battery on a surface which could 

be damaged by the acid contained inside the 

battery. Take precautions to protect the surface on 

which you charge your battery.

• If your battery is old and will not accept a charge, 

do not leave it in the vehicle. Always remove a dead 

battery from the vehicle.

• Non-rechargeable batteries are not to be recharged.

• Rechargeable batteries are only to be charged 

under adult supervision.

• Do not mix new and old batteries.

• Do not mix alkaline, standard (carbon-zinc), or 

rechargeable (nickel-cadmium) batteries.

• Rechargeable batteries (AA type) are to be removed 

from the toy before being charged.

• Only batteries of the same or equivalent type as 

recommended are to be used.

• Batteries are to be inserted with the correct polarity.

• Exhausted batteries are to be removed from the toy.

• The supply terminals are not to be short-circuited.

Battery can fall out and injure a child 

if vehicle tips over. Always use 

battery cover.

PREVENT FIRE

- Never modify the electrical system. 

Alterations could cause a fire resulting. In 

serious injury and could also ruin the 

electrical system.

- Use of the wrong type battery or charger 

could cause a fire or explosion resulting in 

serious injury.

- Use only components provided with 

products.

- Use other than provided could cause 

overheating, fire or explosion.

• The battery must be handled by adults 

only. The battery is heavy and contains 

sulfuric acid (electrolyte). Dropping the 

battery could result in serious injury.

• Never allow children to charge the battery.
• Battery charging must be done by adults 

only. A child could be injured by the 

electricity involved in charging the battery.

• Never lift or carry the battery by the wires 

or connector. This can damage the battery 

and possibly cause a fire resulting in 

serious injury. Lift and carry the battery by 

the case only.

• Read the safety instructions on the 

battery.

• Examine the battery, charger and their 

connectors for excessive wear or damage 

each time you charge the battery. If 

damage or excessive wear is detected, do 

not use the charger or the battery until you 

have replaced the worn or damaged part.

Only use the battery specified by 

manufacturer. 
Only use the charger specified by 

manufacturer. 
Only use the charger in dry locations.

ELECTRICAL HAZARD

WARNING

CAUTION

4

Batter

y Warning

Summary of Contents for BMW M6 GT3 1207




















Reviews: