background image

Operating Your Vehicle

Main functions: 

1) There are remote controllable and pedal switch buttons.

2) Rear drive: Power motor gearbox provides powerful "front or rear" power.

3) Forward / backward function: There are three forward speed level, neutral gear and reverse gear on right side of the panel (each gear 

has its own LED display)

4) Foot pedal function: Press the foot pedal button, when the gear shifter is in forward or backward position, step down the foot pedal to 

move the car forward or backward, and release the foot pedal to stop the car.

5) Charging protection function: All functions needing to be powered by the battery will fail when the battery is being charged. 

6) Forward / backward brake function: It has relay brake function whether it is moving forward or moving backward or parking.

7) Turn the auxiliary pull wheel at the bottom of the car out, and turn the pull handle at the front bottom of the car out to pull it away.

 Press this button to turn on the main power, and the system is in 

standby mode, and the trumpet gives a sound of engine. Red light of 

one button start button and green light of foot switch mode button will 

be on, displaying “00.00” with "V", and the normal voltage will be 

displayed after the engine sound; then the English prompt sound of 

"music player" music is played, and the music button will be invalid 

until the prompt sound is over.

② 

After pressing this button for 2 seconds, the main power will be cut off 

and the system will be shut down.

One-button start button:

 In MUSIC USB BT mode: short press this button, the green light of this 

button will be on for a short period of time and it will change to the 

previous music; long press this button for 2 seconds without release, 

the green light of this button will be on, the volume will be 

decremented, the volume value on display will decrease from U30 to 

U00.

② 

Each time of starting, the default volume value will be U25.

Under MUSIC play mode, press this button to play a song, and the 

green light of this button is on; press this button again to play the 

next song; there are 2 music buttons, each button will play 3 songs 

repeatedly.

Music button: 

Previous \ Volume- button:

 In MUSIC USB BT mode: short press this button, the green light of this 

button will be on for a short period of time and it will change to the next 

music; long press this button for 2 seconds without releasing, the 

green light of this button will be on; the volume will increase and the 

volume value on the display will be displayed incrementally from U00 

to U30.

② 

Each time of starting, the default volume value will be U25.

Next music \  button:

The start button is in “off” mode by default, press once to turn on the light, 

and the green light will be on; press again to turn on the fan, and the light 

will be off; press the button for the third time to turn on both the light and 

fan; press the button for the fourth time to turn off both the light and fan, 

and at the same time, the green light of this button will be off.

Light / fan button:

When this button is pressed, the system will switch to the remote control 

mode, and the green light will be on, then the remote controller can be 

used to drive the car.(At this time, stepping on the accelerator pedal is 

functionless!)

Remote control button: 

 It is by default in the foot switch mode, and the green light of this 

button will be on; then turn on the gear, and step on the pedal switch 

to start and loose the pedal switch to slow down the car; press the 

remote control button to stop the car forcefully. (The car can’t be 

started by foot switch when it is stopped by the remote controller!)

 Safety protection function: Before starting the car by stepping on the 

accelerator or switching from the remote control mode to the 

footswitch mode, you must first loosen the accelerator pedal and then 

step on it.

Foot switch button: 

 It is by default the built-in music play mode, and there is "music 

player" English prompt sound, and the display "MUSIC" will be 

always on; 

 

Press this button and switch to USB mode, and there is "USB 

mode" English prompt, and "USB" on display will flash (Flash 

when USB is not connected, and it will be always on when it is 

connected to USB); 

③ 

Press this button again and switch to BT Bluetooth mode, and 

there is "bluetooth mode" English prompt, "BT" on display will 

flash (Flash when Bluetooth is not connected, and it will be 

always on when Bluetooth is connected); 

 

Press this button again and switch back to the built-in music 

playback mode.

 

The middle four digits display the voltage of the battery in real 

time; it will display the volume change in adjusting the volume 

(U00-U30); which song (0001-9999) in USB music will be 

displayed during USB playback.

 

The function icons on both sides of the display are “MUSIC, MP3, 

V,    ,     ”, and the mode or state in which it lies will be displayed 

by its corresponding icon. 

Display function: 

Mode switch button:

USB playback function:

In USB mode, after connecting USB, the “USB” on the display will 

be always on, and then the audio file in USB can be played.

Bluetooth playback function:  

 

In Bluetooth mode, after connecting Bluetooth, the “BT” on 

display will be always on, and then the audio file in the Bluetooth 

device can be played.

 

When Bluetooth is disconnected, there is a “dingding” prompt 

tone, and “BT” on display will flash.

 

Name of Bluetooth: CHILOKBO

MUSIC

V

USB

BT

USB

Music

Light / fan 

Music

Previous music 

volume (-)

Voltage display

Remote control

Foot switch

Mode switch

USB interface
Next music 

volume (+)

One button start (main switch)

Press 

Press 

Turn on 

the fan

(Turn off 

the light)

Turn on 

both the 

light

And the fan

Loop)

(It will be 

as such

Press 

Press 

Turn on 

the light

Turn off 

both the 

light

And the fan

(It will be 

as such

Press 

USB mode

Press 

Press 

BT mode

Music mode Loop)

USB

Operating Y

our Vehicle I

12

Summary of Contents for BMW M6 GT3 1207




















Reviews: