A.Vivulskio 12D, Vilnius, Lithuania | Tel. +370 5 216 74 25 | www.kid-man.eu | [email protected]
“Kid-Man” is legitimate trademark of “Kasko Group” Ltd. All rights reserved. ©2017 “Kasko Group” Ltd.
28
SET UP
GENERAL WARNINGS
• Do not keep pump in place where it would be diffcult to turn it off easily!
• Please unplug the control unit, if do not need to use for a long time!
• Avoid the cable, plug and main control unit contact with water or other fluid!
• Avoid cables damage when moved the sickbed!
• Ensure that cables are safe and tidy and not caught in the bed mechanism or trailing on the floor
• Avoid sharp objects or strong acid and alkali chemical agents from mattress.
• Avoid use the system with connecting power without any people watch
• Ensure the mattress, cover, cables and power outlet out of fre, heat or strong acid and alkali chemical agents
• Please plug the control unit into the ground power supply
• Do not modify the pump and mattress without authorization of the manufacturer and do not stuff other objects into the
crack of control unit or mattress. Please don’t use the parts which not belong to Kasko Group, UAB.
DO NOT USE DEVICE IF:
• The system sounds abnormal or vibrate intensively
• Control unit drop on the floor and damaged.
• Control unit drop into the water or other fluid.
Place the mattress
on a common
mattress, with the
air hose connectors
orientated to the
footboard. Hang the
pump onto the bed
rail (footboard side),
or place it on a flat
surface.
Pic. 10
Connect air hose
connectors from
air mattress to the
pump unit. Ensure
the air hoses
are not kinked
or tucked under
mattress. Plug the
power cord into the
electrical outlet.
Pic. 11
Turn the
switch ON.
Pic. 12