9
39. Route the harness along the bottom of the front and rear door jam. Route the harness
behind the plastic sill plate and under the driver’s side rear, outermost seat bracket. Fig. 25
40. Connect the four pin plug of the subwoofer harness to the subwoofer enclosure. Slide
the red locking tab over to prevent the connectors from accidentally coming disconnected.
41. If the vehicle is equipped with a factory subwoofer it must be disconnected for the sys-
tem to operate properly.
42. Reinstall all previously removed parts in reverse order making sure not to pinch any wires
along the way during the re-installation process. Failure to do so could result in an electrical
short in the vehicle.
43. Install the supplied fuses in the fuse holders under the hood.
44. Reconnect the negative battery cable. Torque to 5Nm.
Fig. 25
