7
Subwoofer Harness Routing
28. Route the harness down the kick panel and along the bottom of the front door jam.
Route the 10 pin connector under the front seat and out of the existing hole. Fig 17
29. Remove the two 8mm bolts holding the bracket for the seat wiring. Mount the amplifi er/
bracket assembly as shown in Fig 18
30. Connect the ten pin connector of the harness to the amplifi er. Slide the red locking tab
over to prevent the connectors from accidentally coming disconnected.
31. If the vehicle is equipped with the storage cover under the rear seat, the driver’s side
cover will need to be removed to allow the subwoofer to install. To remove the storage cov-
er, remove the four 18mm bolts securing the drivers side rear seat and carefully lift the seat
out. Fig 19
32. Using a panel removal tool remove the plastic cover on the side of the seat. Fig. 20
Fig. 17
Fig. 18
Fig. 19
Fig. 20
