8
33. Remove the 13mm and 10mm bolt on both sides of the bottom of the rear seat removed
in step 26 and remove the storage cover. Fig. 21
34. Reinstall the seat and the back two 18mm bolts securing the seat. Tighten to 30ft/lbs.
35. Remove the Torx®T30 securing the front latch of the storage cover and remove latch.
Fig. 22
36. For vehicles equipped with one piece rear bench seats remove the 18mm bolt securing
the driver’s (left) side of the seat to the fl oor.
37. For one piece rear bench seat you will also need to fi nd threaded nut insert in the fl oor
pan concealed by the carpet fl ap. Fig. 23
38. Set the enclosure in place and reinstall seat bolts (a bolt is supplied for one piece bench
seats) and tighten. Torque to 30 ft/lbs. Fig. 24
Fig. 21
Fig. 22
Fig. 23
Fig. 24
