3
1. Disconnect negative battery cable
2. Pull the rubber liner out of the storage tray on the dash and remove two Torx®T-20
screws. Fig. 1
3. Using a panel removal tool pry out on the plastic trim panel of the 110V AC plug and re-
move it, if so equipped. Fig. 2
4. Remove the Torx®T-20 behind the plastic trim panel removed in step 2, if so equipped.
Fig. 3
If the vehicle does not have a center console skip to step 9.
5. Using a panel removal tool, carefully pry up on the trim ring around the shifter and remove.
Fig. 4
6. Pull up on the front edge of the rubber liner in the storage area under the HVAC cotrols
and remove. Fig 5
7. Remove the two Phillips screws under the rubber liner removed in step 6. Fig. 6
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Remember to place your warranty card in the glove box for future use.
