38
STEERING WHEEL CONTROLS
Headlights & High Beams
AUTO Light
– When the light switch is in the AUTO Light position, the tail lights and headlights will turn
ON/OFF automatically depending on the amount of light outside the vehicle.
Daytime Running Lights (DRL)
– DRL may help others to see the front of your vehicle during the day. The
lights will turn on automatically when the ignition or Engine Start/Stop button is ON and the headlight switch
is in the AUTO position, unless one of the following occurs:
§
Headlights are on
§
Parking brake is
applied
§
Engine is turned off
§
Switch is in the DRL
OFF position
Headlight / High Beam
Lever Operation
§
Rotate lever switch to change the headlight function:
§
Press lever away from you to turn high beam headlights ON
§
Pull lever to flash headlights/high beams or to turn off the high beams
High Beam Assist (HBA)*
– High Beam Assist is designed to automatically adjust the headlight range by
switching between high and low beams based on light detected from other vehicles and road conditions.
To enable HBA, toggle the light switch to the AUTO Light position and turn on the high beams by pushing
the lever away from you. The High Beam Assist indicator
will illuminate.
REMINDERS:
§
High Beam Assist does not operate below certain speeds, or in some lighting and driving conditions. Please be aware of your
surroundings and exercise proper road etiquette when operating a vehicle using the high beams
§
HBA will operate when vehicle speed exceeds 25 mph
§
If the lever is pushed away from you while HBA is operational, HBA will turn off and the high beams will be on continuously. If the lever is
pulled toward you while HBA is operational, HBA will turn off
§
If the light switch is switched to the headlight position, HBA will turn off and low beams will be on continuously
§
When the HBA indicator illuminates on the instrument cluster, the HBA is not working properly. See an authorized Kia dealer for service
OFF
OFF
Headlight position
Parking Light position
AUTO
Auto Light /DRL/
High Beam Assist*
OFF
OFF position
To operate Turn Signals:
Move lever up/down for right/left turn signal.
One-touch lane change signal
is activated by briefly pressing the turn signal lever slightly for less than
1 second and then releasing. The lane change signal will blink 3 times.
To change how many times the lane change signal blinks (3/5/7), go to User Settings in the LCD
instrument cluster modes.
To operate Fog Lights:
Rotate switch to turn Fog Lights ON/OFF.
REMINDER:
Headlights must be ON for fog light operation.
See section 4 in the Owner’s Manual for more information. For illustrative purposes only. Your actual display, buttons and/or features may vary.
Turn Signals & Fog Lights
*
ST
EER
IN
G W
HEEL
CON
TR
OL
S
See section 4 in the Owner’s Manual for more information.
*IF EQUIPPED
