20
*IF EQUIPPED
†LEGAL DISCLAIMERS ON BACK INSIDE COVER
AD
AS
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
Your vehicle’s steering wheel buttons may
differ from those in the illustrations.
See section 5 in the Owner’s Manual for more
information.
Smart Cruise Control (SCC) with Stop & Go
†6
The Smart Cruise Control (SCC) with Stop & Go system is designed to maintain
a predetermined distance from vehicles detected ahead by automatically
adjusting the driving speed as needed. When traffic is detected, the vehicle
will slow down to maintain a set distance behind traffic without depressing the
accelerator or brake pedal.
With SCC on and activated, the vehicle-to-vehicle distance set, and the system
detects a vehicle slowing or stopping, the system can bring the vehicle to a
complete stop. When the vehicle ahead starts to move forward, the SCC system
re-engages. If the vehicle ahead stops for more than 3 seconds, the accelerator
pedal or the RES+ button must be pressed to start moving the vehicle.
To set/adjust the SCC speed:
§
Accelerate/decelerate to the desired speed
§
Press the CRUISE button
A
to turn the system ON. The CRUISE indicator
will illuminate on the instrument cluster
§
Press the SET - button
B
to set the speed. Press the RES+/SET- button
B
up/down to increase/decrease the set speed
To set the vehicle-to-vehicle distance:
§
Press the SCC button
C
on the steering wheel
§
Each time you press
C
the vehicle-to-vehicle distance will change
D
, indicated by the number of bars that appear on the display
E
To cancel SCC operation:
Press the CANCEL button
F
or press the
brake pedal. The LCD screen will display a message that the SCC
operation is canceled.
To turn SCC system OFF:
Press the CRUISE button
A
. The CRUISE
indicator on the instrument cluster will turn OFF.
To adjust the sensitivity of the SCC system:
Press the mode
button
G
on the Steering Wheel. With the OK button
H
, select Drive
Assistance, then SCC Response. Then select Fast, Normal or Slow.
§
The speed setting for the SCC can be adjusted under the following conditions:
§
You must be traveling at a minimum speed of 20 mph
§
When following a vehicle, there is no minimum speed requirement
§
When following a vehicle, the system can automatically adjust your cruise speed
based on the vehicle detected ahead. If the vehicle detected remains at a standstill
for more than 3 seconds, the system will disable
§
To change the cruise control mode from SCC to standard cruise control, press and
hold button
C
. Repeat to switch back to SCC mode (The SCC system must not be
activated to change modes)
QUICK TIPS
(Distances are approximate and vary
depending on vehicle speed)
172ft
131ft
82ft
107ft
CRUISE
60
MPH
(Display on LCD screen)
CRUISE
MODE
CRUISE
CANCEL
RES
OK
SET
CRUISE
CANCEL
RES
OK
SET
MODE
CRUISE
CANCEL
RES
OK
SET
MODE
CANCEL
RES
OK
SET
MODE
CRUISE
CANCEL
RES
OK
SET
CRUISE
CANCEL
RES
OK
SET
A
G
H
B
F
C
D
E
SMART CRUISE
CONTROL WITH
STOP & GO VIDEO
To view a video on your
mobile device, snap this
QR Code or visit the listed
website. Refer to page 2
for more information.
www.youtube.com/KiaFeatureVideos
QR CODE
