50
SEATING
SE
AT
IN
G
Driver Position Memory System
*
The integrated system stores into memory the position of the
driver’s seat, outside rearview mirrors, and steering wheel
positions. To store positions into memory, first place the gear
shift into P (Park) while the Engine Start/Stop button is in the
ON position. Then:
1. Adjust the driver’s seat, outside rearview mirrors, settings
and steering wheel positions
2. Press the SET button
A
on the control panel. System will
beep once
3. Press one of the memory buttons 1 or 2
B
within 4 seconds.
The system will beep twice when memory has been stored
SET
(Located on driver’s door control panel)
REMINDER:
Do not attempt to operate the driver position memory system while the vehicle is moving. This could result in loss of control
of the vehicle.
B
B
A
See section 3 in the Owner’s Manual for more information.
*IF EQUIPPED
