Kia Picanto, Manual

Page: 399 / 680

101
6
6
Driving your vehicle Manual Speed Limit Assist (MSLA)
The set speed limit will be displayed
on the cluster.
To drive over the preset speed limit
you must depress hard on the
accelerator pedal (more than
approximately 80%) until the kick
down mechanism works with a
clicking noise. Then the set speed
limit will blink and chime will sound
until you return the vehicle speed
within the speed limit.
NOTICE
䳜 Depressing the accelerator pedal
less than approximately 50%, the
vehicle will not speed over the
preset speed limit but maintain
the vehicle speed within the speed
limit.
䳜 A clicking noise heard from the
kick down mechanism by
depressing the accelerator pedal
fully is a normal condition.
To turn off the speed limit control,
do one of the following:
䳜 Press the speed limit but
-
ton once again.
䳜 Press the Driving Assist button (If
you press the Driving Assist but
-
ton, the cruise function will turn
on)
If you press the O button once, the
set speed limit will cancel, but it will
not turn the function off. If you wish
to reset the speed limit, move the
switch up (to RES+) or down (to
SET-) to the desired speed.
OJA050062
OYB050151L
OYB050019L