Kia Picanto, Manual

Page: 43 / 680

21
3
3
Safety features of your vehicle Seat belts
Pull the metal tab (3) and insert it
(3) into the buckle (4). There will be
an audible 䳖click䳗 when the tab locks
into the buckle. Make sure the belt is
not twisted. When using the rear
centre seat belt the buckle with the
䳖CENTER䳗 mark must be used.
To release the seat belt:
The seat belt is released by pressing
the release button (1) on the locking
buckle. When it is released, the belt
should automatically draw back into
the retractor.
If this does not happen, check the
belt to be sure it is not twisted, then
try again.
Lap belt (if equipped)
To fasten your seat belt:
To fasten a 2-point static type belt,
insert the metal tab (1) into the
locking buckle (2). There will be an
audible "click" when the tab locks
into the buckle. Check to make sure
the belt is properly locked and that
the belt is not twisted.
With a 2-point static type seat belt,
the length must be adjusted manu
-
ally so it fits snugly around your
body. Fasten the belt and pull on the
loose end to tighten.
OYB030016L
ODEEV058078NR
OYB030071L