Kia Picanto, Manual

Page: 282 / 680

Infotainment System
26 5
Bluetooth
NOTICE
䳜 The screen image in this manual is
an example. Check your system
screen for the exact vehicle name
and Bluetooth device name.
䳜 The default passkey is 䳒0000䳓.
䳜 It may take a whilst for the sys
-
tem to connect with the device
after you permit the system to
access the device. When a con
-
nection is made, the Bluetooth
status icon appears at the top of
the screen.
䳜 You can change the permission
settings via the mobile phone䳓s
Bluetooth settings menu. For
more information, refer to your
mobile phone䳓s user guide.
䳜 To register a new device, repeat
steps 1 to 3.
䳜 If you use the automatic Blue
-
tooth connection function, a call
may be switched to the vehicle䳓s
Handsfree when you are taking on
the phone near the vehicle whilst
the vehicle䳓s engine is on. If you do
not want the system to connect
with the device automatically,
deactivate Bluetooth on your
device.
䳜 When a device is connected to the
system via Bluetooth, the device䳓s
battery may discharge faster.
Connecting a paired device
To use a Bluetooth device on your
system, connect the paired device to
the system. Your system can con
-
nect with only one device at a time.
1. From the control panel, press the
[ PHONE ] button, and then select
Phone settings ▶ Paired devices .
䳜 If there is no connected device,
press the Call/Answer button
on the steering wheel.
2. Turn the [ TUNE ] knob to select
the device to connect, and then
press the knob.
䳜 If another device is already con
-
nected to your system, discon
-
nect it. Select the connected
device to disconnect.
NOTICE
䳜 If a connection ends because a
device is out of the connection
range or a device error occurs, the
connection will be restored auto
-
matically when the device enters
the connection range or when the
error is cleared.
䳜 Depending on auto connection
priority, connection to a device
may take time.