manualshive.com logo in svg

Kia Optima 2004, Owner'S Manual

The Kia Optima 2004 Owner's Manual is a comprehensive guide that allows you to effortlessly navigate and maintain your vehicle. Explore detailed instructions, helpful tips, and practical information, available for free download, at manualshive.com. Enhance your driving experience with this essential manual to ensure optimal performance and longevity.

Share
Download
background image

3-57

AIR BAG WARNING LIGHT

The purpose of the air bag warning light
in your instrument panel is to alert you of
a potential problem with your Air Bag -
Supplemental Restraint System (SRS).
Have the system checked if: 
•

The light does not illuminate briefly
when you turn the ignition ON.

•

The light stays ON after the engine
starts.

•

The light comes ON or flashes while
you are driving.

SUPPLEMENTAL
RESTRAINT SYSTEM
SERVICE

Your Supplemental Restraint System is
virtually maintenance-free. There are no
parts which you can service.
You must have the system serviced
under the following circumstances: 
•

If an air bag ever inflates, the air bag
must be replaced. Do not try to
remove or discard the air bag by
yourself.This must be done by an
authorized Kia dealer or a qualified
service technician.

•

If the air bag warning indicator light
alerts you of a problem, have the air
bag system checked as soon as
possible. Otherwise, your air bag
might not inflate when you need it.

WARNING - 

SRS MODIFICATIONS

• Do not modify your steering

wheel or any other part of the
Supplemental Restraint System.
Modification could make the
system ineffective. 

• Do not work on the system’s

components or wiring. This
could cause the air bags to
inflate inadvertently, possibly
seriously injuring someone.
Working on the system could
also disable the system so that
the air bags do not deploy in a
collision.

AIR BAG WARNING LIGHT

AIR

BAG

Summary of Contents for Optima 2004










































































































































































































































Reviews:

No comments

Related manuals for Optima 2004

cam 2850 Mounting Instructions preview
2850
Brand: cam Pages: 2
Dapper Lighting 575 Install Manual preview
575
Brand: Dapper Lighting Pages: 2
Daihatsu TERIOS J100 Maintenance Manual preview
TERIOS J100
Brand: Daihatsu Pages: 43
cam HS Series Operating Manual preview
HS Series
Brand: cam Pages: 28
Velleman CAMCOLC1N User Manual preview
CAMCOLC1N
Brand: Velleman Pages: 6
Saab 32 025 888 Installation Instructions preview
32 025 888
Brand: Saab Pages: 3
Toyota 4Runner 2019 Quick Reference Manual preview
4Runner 2019
Brand: Toyota Pages: 52
Dodge 8W-30 Wiring Diagram preview
8W-30
Brand: Dodge Pages: 24
Honda Pilot 2019 Owner'S Manual preview
Pilot 2019
Brand: Honda Pages: 85
Menabo DELTA DL FIX 209FP Fitting Instructions Manual preview
DELTA DL FIX 209FP
Brand: Menabo Pages: 8
Valeo Park Vision VAL632210 Instruction Manual preview
Park Vision VAL632210
Brand: Valeo Pages: 25
Mont Blanc ACTIVA+ Assembly Instructions preview
ACTIVA+
Brand: Mont Blanc Pages: 2
Mercedes-Benz 2007 SLR Mclaren Operator'S Manual preview
2007 SLR Mclaren
Brand: Mercedes-Benz Pages: 425
IOGear GBHFK201W6 User Manual preview
GBHFK201W6
Brand: IOGear Pages: 38
QA1 GS501 Installation Instructions preview
GS501
Brand: QA1 Pages: 3
Green Valley 601951 Instructions Manual preview
601951
Brand: Green Valley Pages: 17
ZENEC ZE-RVC85WA Mounting Instructions preview
ZE-RVC85WA
Brand: ZENEC Pages: 2
Audi S4 Biturbo Buyer'S Manual preview
S4 Biturbo
Brand: Audi Pages: 9

Brands by name

Popular brands

Load more brands