manualshive.com logo in svg

Kia Optima 2004, Owner'S Manual

The Kia Optima 2004 Owner's Manual is a comprehensive guide that allows you to effortlessly navigate and maintain your vehicle. Explore detailed instructions, helpful tips, and practical information, available for free download, at manualshive.com. Enhance your driving experience with this essential manual to ensure optimal performance and longevity.

Share
Download
background image

Floor - defrost position 

Most of the air flow is
directed to the floor and the
windshield with a small
amount directed to the side
window defrosters. (outlet
port:     ,     ,    )
In automatic operation, the
air conditioning system will
automatically cycle on and
the outside (fresh) air
position will be selected.  To
cancel, press the outside
(fresh) air button on the
instrument panel once.

Defrost Button  

Most of the air flow is directed to the
windshield with a small amount of air
directed to the side window defrosters.
(outlet port:     ,     )
When the defrost button is pressed the
outside (fresh) air position will
automatically selected and the air will be
discharged through the windshield
defrost vents. The air conditioning will
automatically operate based on ambient
temperature. If you don’t want the air-
conditioning or outside (fresh) air
position press the corresponding button
to cancel the operation.

Air Conditioning Button (If
equipped)  

Push the A/C button to turn the air
conditioning system on. The indicator
light in the button will illuminate when
the fan speed control knob is on. Push
the button again to turn the air
conditioning system off.

DRIVING YOUR VEHICLE

4-52

A

C

D

A

D

MODE

AMB

A/C

OMSA2115B

Summary of Contents for Optima 2004










































































































































































































































Reviews:

No comments

Related manuals for Optima 2004

PAC I GM3 Instruction Manual preview
I GM3
Brand: PAC Pages: 15
ULTIMATE SPEED CARBON Assembly And Safety Advice preview
CARBON
Brand: ULTIMATE SPEED Pages: 19
JASTEC von-S2 Instruction Manual preview
von-S2
Brand: JASTEC Pages: 12
DAVIS 8126GD User Manual preview
8126GD
Brand: DAVIS Pages: 32
Farad BARS PR25 - 2 Quick Start Manual preview
BARS PR25 - 2
Brand: Farad Pages: 8
Maserati Quattroporte Automatic Owner'S Manual preview
Quattroporte Automatic
Brand: Maserati Pages: 272
RBP STEALTH POWER RBP-216-SP Installation Manual preview
STEALTH POWER RBP-216-SP
Brand: RBP Pages: 16
HURST STREET SUPER SHIFTER Installation Instructions preview
STREET SUPER SHIFTER
Brand: HURST Pages: 2
Jeep GLADIATOR 2022 Owner'S Manual preview
GLADIATOR 2022
Brand: Jeep Pages: 380
Thule Kit 1429 Fitting Instructions Manual preview
Kit 1429
Brand: Thule Pages: 8
Metra Electronics 99-5819 Installation Instructions Manual preview
99-5819
Brand: Metra Electronics Pages: 8
CrimeStopper CA-504.BRKT Install Manual preview
CA-504.BRKT
Brand: CrimeStopper Pages: 1
RHOX LGT-381L Installation Instructions Manual preview
LGT-381L
Brand: RHOX Pages: 8
Yakima K896 Instructions Manual preview
K896
Brand: Yakima Pages: 12
Saab 2000 9-5 2.3 Turbo Ecopower Owner'S Manual preview
2000 9-5 2.3 Turbo Ecopower
Brand: Saab Pages: 256
DRAGONFIRE 11-0800 Installation Instructions preview
11-0800
Brand: DRAGONFIRE Pages: 4
Edelbrock PRO-FLO XT 3527 User Manual preview
PRO-FLO XT 3527
Brand: Edelbrock Pages: 39
Metra Electronics 99-3305 Installation Instructions Manual preview
99-3305
Brand: Metra Electronics Pages: 12

Brands by name

Popular brands

Load more brands